Medcare DM7000 Defibrillator equipped to deal with Basic Life Support (BLS) to Advanced Cardiac Life Support (ACLS). Fitted with high-resolution display and information display of Heart Rate, Lead/Pads, Alarm On/Off, SpO2, AED Functions and Prompts, Alarm Selection and Limits, Delivered Energy informations. Includes defibrillator mode, ECG monitoring, Sp02 module, recorder, AED mode, manual mode and a synchronized mode for wide range of clinical uses.
Features:
- Screen Size: 7 inches(17.7 cm) diagonally
- Sweep Speed: 25mm/sec
- Waveform: Biphasic
- Charge Time: Less than 7 seconds with a new fully charged battery
- Energy Display: Monitor display indicates both selected and delivered energy
- Charge Prompt Type: Voice and visual prompts
- Electrode Impedance Measurement Range: 0-250 ohms
- Patient Connection: 3-lead ECG cable, or 5-lead ECG cable, paddles
- Lead Selection: Displayed on monitor, paddles, I, II, III, AVR, AVL, AVF, V
- ECG Size: 0.25, 0.5, 1, 1.5, 2, 4 cm/mV display on monitor
- Heart Rate: 20-300BPM
- Heart Rate Alarm: On/Off displayed on monitor, user-selectable
- Smart Alarms: Beeper/voice prompts indicate shockable rhythm
- Rechargeable, Ni-MH battery, 12V
- Measurement Range: 30~100%, ±2% between 80%~90%, others ±5%
- Alarm Range: User set high limit and low limit
- Alarm Accuracy: ±10% within setting values
- Alarm time Accuracy: less than 12 sec
- Energy Selection: Selectable at 2, 5, 7, 10, 20, 30, 50, 70, 100, 150, 200, 300, 360 joules
- Synchronized Mode: Synchronizes defibrillator pulse to patient’s R-wave. ”SYNC” message displayed on monitor
- Charge Control: Control on device front panel, press key on paddle
Medcare DM7000 Defibrillator designed with operating time of 100 defibrillator discharges , or 3 hours minimum of continuous ECG monitoring. Includes recorder for 50mm thermal paper at a speed of 12.5mm/sec, 25mm/sec, 50mm/sec. User-selectable 6-second delay with various print modes and method that is easily configurable by user. Defibrillator device includes AED function which auto analyzes and charges x3 with programmable auto energy level selection, screen prompts, and voice prompts and a ventricular fibrillation with amplitude >=200uV, ventricular tachycardia with rates >=140bpm, and QRS complex wave duration >=140ms. Highly suitable for all defibrillation needs and uses.
